Gun gray self-draining sink organizer installed beside a black kitchen sink SELF-DRAINING · NO DRILLING

A clearer sink zone

Self-Draining Sink Organizer

Keep soap, sponges, brushes, and cloths together while the sloped base helps guide runoff toward the basin—without drilling into the counter.

Sloped drainage pathTwo suction cupsRemovable inner tray
$39.95
Choose your colorGun Gray
Choose your packMore value with two
Secure checkout · Tracking included
✓ Free shipping✓ No drilling✓ Two finishes✓ Easy to rinse
Sloped baseHelps direct runoff toward the outlet
Two suction cupsFor smooth, flat, nonporous surfaces
Removable trayLifts out for easier rinsing
Front cloth railKeeps a dishcloth within reach
Gun gray sink organizer positioned beside a large kitchen sink

Use the sink edge better

Turn scattered cleaning tools into one tidy station

The organizer keeps everyday sink essentials upright and together. Set the drainage outlet over the basin edge so water from wet sponges and brushes has a clear path back toward the sink.

Every detail has a job

Organize, rinse, and mount with less fuss

Gun gray organizer holding soap sponges brush and cloth

Keep daily tools together

Separate zones hold soap, sponges, scrubbers, brushes, stoppers, and other small sink tools.

Sink organizer body rail inner tray and suction cup components

Lift out the inner tray

The removable divider tray makes the inside easier to access when it is time to rinse and wipe down.

Two suction cups securing the gun gray sink organizer

Mount without drilling

Two suction cups create a removable hold on a properly cleaned, smooth, flat, nonporous surface.

A clear drainage path

Position the outlet over the basin

The angled interior helps runoff move toward the front opening. The outlet must extend over the sink edge so gravity can guide water into the basin.

  • No pump or moving parts
  • Open outlet stays visible
  • Designed for sink-edge placement
  • Front rail remains accessible
Diagram showing the sloped base directing water through the front outlet

Choose the finish that fits

Two colors. The same practical layout.

Gun gray sink organizer installed beside a black sink

Gun Gray

A deeper neutral for black, charcoal, and stainless steel sink areas.

Milky white sink organizer installed beside a stainless steel sink

Milky White

A lighter finish for white tile, stone, and warm wood kitchens.

Measure before ordering

Check the counter space and sink edge

Leave room for the organizer body, front rail, and drainage outlet. The suction cups need a smooth, level mounting area without grout lines or texture.

9.2 in / 23.4 cmOverall width5.6 in / 14.2 cmOverall depth4.5 in / 11.5 cmOverall height6.9 in / 17.5 cmFront rail spanABSMain organizer bodyStainless steelFront panel and rail
Sink organizer dimensions 23.4 by 14.2 by 11.5 centimeters
ABS sink organizer body stainless steel front panel and suction cups

Made for routine sink-side use

Simple materials. Straightforward care.

Lift out the inner tray, empty debris, and rinse the organizer as needed. Wipe the stainless steel panel and rail with a soft cloth, then let the parts dry before reassembling.

RINSERemove the inner tray first.WIPEUse a soft cloth on the metal surfaces.DRYLet components dry before loading.RECHECKConfirm the suction hold regularly.

No-drill setup

Clean, press, position, check

Correct surface preparation is essential for suction performance.

Installation guide for the suction-mounted sink organizer
  1. 1

    Clean and fully dry

    Remove grease, soap residue, dust, and moisture from the surface and cups.

  2. 2

    Press both cups firmly

    Choose a smooth, flat, nonporous area and press out trapped air.

  3. 3

    Align the drainage outlet

    Keep the opening over the basin edge before adding your sink essentials.

  4. 4

    Check the hold

    Test the seal before loading and recheck it during regular use.

Not recommended for: grout lines, textured tile, porous stone, unfinished wood, curved edges, or uneven mounting areas.

At a glance

See the full feature layout

Storage zones, drainage, mounting, front rail, materials, and dimensions are shown together for a final fit check.

Six key features of the self-draining sink organizer

Questions, answered

Frequently asked questions

What comes with each organizer?

Each piece includes one organizer body, one inner divider tray, one front rail, and two suction cups. Soap, sponges, brushes, and cloths shown in photos are not included.

Does it drain automatically?

The sloped base uses gravity to help guide runoff toward the open outlet. The outlet must be positioned over the basin edge for water to reach the sink.

Which surfaces work best?

Use a clean, dry, smooth, flat, nonporous surface. Avoid grout lines, textured tile, porous stone, unfinished wood, curves, and uneven areas.

Are the two pieces different colors?

No. The 2 Pieces option includes two complete organizers in the color you select.

How should I clean it?

Remove the inner tray, rinse the organizer, wipe the stainless steel surfaces with a soft cloth, and dry the parts before reassembling.

Milky white sink organizer in a warm modern kitchen

A better-value sink reset

Choose your color. Pick your pack.

Get one for $39.95 or choose two for $59.95 and save $19.95 compared with buying two singles.

CHOOSE YOUR PACK